ModalStressProportions.xlsx (17.19 kB)
Data for the proportion of longitudinal stress travelling in Modes 1-4 in a Hopkinson pressure bar, for 0.35 < fa/c0 < 0.90, at the bar surface and as a cross-sectional mean
dataset
posted on 2020-01-26, 10:28 authored by Andrew BarrAndrew Barr, Samuel RigbySamuel Rigby, Max ClaytonThis dataset contains tabulated values for how the stress in a high frequency waveform will be divided between each of the first four propagating modes, for longitudinal waves in cylindrical pressure bars, up to a normalised frequency of fa/c0=0.9. This data can be used to perform four-mode dispersion correction of high frequency signals, such as overpressure measurements from blast loading using Hopkinson pressure bars.
Data was calculated using LS-DYNA to model the propagation of single-frequency pulses in a long steel pressure bar. At each normalised frequency a short, raised-cosine windowed sinusoidal forcing function was applied to the end of the bar. The stress in the bar dispersed into multiple modal 'pulses' as it propagated, allowing the contribution of each mode to be calculated from the amplitude of the pulses.
Values are provided up to a normalised frequency of fa/c0 = 0.9, where f is frequency, a is the radius of the bar, and c0 is the one-dimensional wave speed. The table indicates whether the values are modelled directly in LS-DYNA (M) or calculated by interpolation of the modelled results (I).
More details are available in our Impact Engineering paper below:
History
Ethics
- There is no personal data or any that requires ethical approval
Policy
- The data complies with the institution and funders' policies on access and sharing
Sharing and access restrictions
- The data can be shared openly
Data description
- The file formats are open or commonly used
Methodology, headings and units
- Headings and units are explained in the files
