The University of Sheffield
Browse
1/1
6 files

Electrical and optical characterisation of low temperature grown InGaAs for photodiode applications

Dilute bismide and nitride alloys are promising semiconductors for bandgap engineering, opening additional design freedom for devices such as infrared photodiodes. Low growth temperatures are required to incorporate bismuth or nitrogen into III‑V semiconductors. However, the effects of low growth temperature on dark current and responsivity are not well understood. In this work, a set of InGaAs p‑i‑n wafers were grown at a constant temperature of 250, 300, 400 and 500 °C for all p, i and n layers. A second set of wafers was grown where the p and n layers were grown at 500 °C while the i-layers were grown at 250, 300 and 400 °C. Photodiodes were fabricated from all seven wafers. When constant growth temperature was employed (for all p, i and n layers), we observed that photodiodes grown at 500 °C show dark current density at ‑1 V that is 6 orders of magnitude lower while the responsivity at an illumination wavelength of 1520 nm is 4.5 times higher than those from photodiodes grown at 250 °C. Results from the second set of wafers suggest that performance degradation can be recovered by growing the p and n layers at high temperature. For instance, comparing photodiodes with i-layers grown at 250 °C, photodiodes showed dark current density at -1 V that is 5 orders of magnitude lower when the p and n layer were grown at 500 °C. Postgrowth annealing, at 595 °C for 15 minutes, on the two wafers grown at 250 and 300 °C showed recovery of diode responsivity but no significant improvement in the dark current. Our work suggests that growth of the cap layer at high temperature is necessary to maintain the responsivity and minimise the dark current degradation, offering a pathway to developing novel photodiode materials that necessitate low growth temperatures.

Funding

Realising a solid state photomultiplier and infrared detectors through bismide containing semiconductors

Engineering and Physical Sciences Research Council

Find out more...

Realising a solid state photomultiplier and infrared detectors through Bismide containing semiconductors

Engineering and Physical Sciences Research Council

Find out more...

History

Ethics

  • There is no personal data or any that requires ethical approval

Policy

  • The data complies with the institution and funders' policies on access and sharing

Sharing and access restrictions

  • The data can be shared openly

Data description

  • The file formats are open or commonly used

Methodology, headings and units

  • There is a readme.txt file describing the methodology, headings and units

Usage metrics

    Department of Electronic and Electrical Engineering

    Licence

    Exports

    RefWorks
    BibTeX
    Ref. manager
    Endnote
    DataCite
    NLM
    DC