EACS 2016 paper - FAULT TOLERANT CONTROL DESIGN OF FLOATING OFFSHORE WIND TURBINES
journal contributionposted on 28.03.2017 by J. Rodellar, C. Tutiven, L. Acho, Y. Vidal
Any type of content formally published in an academic journal, usually following a peer-review process.
EACS 2016 Paper No. 160
This work is concerned with active vibration mitigation in wind turbines (WT) but not through the use of specifically tailored devices. Instead, a general control scheme is designed for torque and pitch controllers based on a super-twisting algorithm, which uses additional feedback of the fore-aft and side-to-side acceleration signals at the top of the WT tower to mitigate the vibrational behavior. In general, proposed methods to improve damping through pitch and torque control suffer from increased blade pitch actuator usage. However, in this work the blade pitch angle is smoothed leading to a decrease of the pitch actuator effort, among other benefits evidenced through numerical experiments. The most frequent faults induce vibrations in the corresponding WT subsystems. In fact, vibration monitoring has been recently used for fault diagnosis Thus, by means of vibration mitigation, different faulty conditions can be alleviated leading to a passive fault tolerant control. In this work, coupled non-linear aero-hydroservo-elastic simulations of a floating o shore wind turbine are carried out for one of the most common pitch actuator faults.