In this folder, the results showed in Figures and Tables in the paper are reported in an Excel file "Results_file".

In this file, there are different sheets:

NumElements_CompTime - this contains the number of elements and computational time to solve the FE models, reported in Table 2 and 3;

MeshConvergenceStudy - this contains the results of the Mesh convergence study reported in Figure 3.
Sensitivity Deflection - Stress AND Sensitivity Strain - these contain the results of the sensitivity analysis reported in Table 4, 5 and 6;

Correlation - this contains the results of the correlation analysis reported in Figure 6;

In the "Frequency_plot_files" folder, the files for the frequency plots in Figure 7 are reported:

MinStrainMeshPoints(...).txt - these files contains the values of minimum principal strain used in the frequency plots in Figure 7.

The "Example_Model" folder contains an example of the models used in the sensitivity analysis for Patient #3 with simplified screw with diameter 6.5mm and length 45mm

The folder contains:
- the Ansys workbench 2020R2 project file corresponding to the model in the name of the folder;
- the corresponding geometry SpaceClaim file;
- the Ansys cdb mesh file exported from Bonemat;
- the calibration xml file used in Bonemat;
- the Ansys apdl command snippet used in Mechanical to build an heterogeneous model of the bone.